lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Wiper Motor|Circuit Breaker Test|Page 7470 > < Wiper Motor|Circuit Breaker Test|Page 7468
Page 5
background image

depressed park motor.

4.

If current draw exceeds specifications in either test position, repair or replace motor.

Depressed Park Type Exc. 1982---87 Lincoln Continental & 1983---87 Cougar & Thunderbird
    Motor terminals may be too small to make necessary test connections. If necessary use jumper wires with suitable connector sleeves between motor
and test equipment.

1.

Disconnect wiper linkage from output arm and electrical connectors from motor.

2.

Connect positive ammeter lead to common terminal on connector and connect negative meter lead to battery positive post, Fig. 4.

3.

Alternately connect negative battery terminal to high and low speed terminals in connector using a jumper wire.

4.

Motor should run in both test positions, and meter should indicate 3.5 amp draw or less.

5.

If current draw exceeds 3.5 amps, check output arm and windlatch assembly. If output arm assembly is satisfactory, repair or replace motor.

Wiper Switch Continuity Test

Fig. 6 Multi-function switch. Taurus & Sable

Wiper Motor|Circuit Breaker Test|Page 7470 > < Wiper Motor|Circuit Breaker Test|Page 7468