Continental V8-4.6L DOHC (1995)
Keyless Entry Transmitter: Service and Repair
1. NOTE: The permanent entry code for the driver door module is viewed by requesting the PID-KEY CODE on Rotunda New Generation Star
(NGS) Tester 007-00500 or equivalent. Enter the five digit permanent entry code into keyless entry keypad.
2. Within five seconds of pressing last button of permanent code, press the 1/2 button within five seconds of pressing the last button of the permanent
code.
3. Press LOCK button on first keyless entry remote transmitter within five seconds of pressing the 1/2 button.
4. Press any button on second keyless entry remote transmitter within five seconds of pressing the first transmitter LOCK button.
^
After each successful transmitter reprogramming, the doors will signal by locking and unlocking.
^
If keyless entry keypad illumination goes Out before all transmitters are reprogrammed into driver door module, the process must be repeated
beginning with Step 1.
^
Up to four transmitters may be programmed to a vehicle in this manner.
