Continental V8-4.6L DOHC (1995)
High Current Distribution Cover, English Owner
Guide Sticker Correction Page, French Owner Guide
Sticker Correction Page
Lincoln
F43Z-14K095-DA
DD
Fuse and Jumper Harness, Engine Cooling Fan Motor
Continental
- with attaching parts
3.8L
Contains one of each: harness, bolt and nut
Attachment III - Technical Instructions - Kit AA
Technical Instructions
Engine Cooling Fan Motor Wiring Harness Circuit Protection Modification
Kit AA Designated Vehicles
Vehicles Affected:
1994 - 2.3L Tempo/Topaz, 1992-1994 3.0L Tempo/Topaz
Required Parts:
F43 - Z-14K095-BB
Installation Procedure:
1.
Open hood. Disconnect battery negative cable.
2.
Remove air intake tube resonator assembly from upper radiator support, if equipped.
3.
Disconnect existing vehicle wiring harness connector from engine cooling fan motor. Disconnect the push pin retainer securing the existing vehicle
harness to the shroud.
4.
Using a 9/32 inch drill bit, drill a hole in the shroud straight down at the 12 o'clock position and 3/8 inch in from the back edge. See Figure 1-AA.
CAUTION