Continental V8-4.6L DOHC (1995)
Engine Mount: Service and Repair
Front
1. Turn off air suspension. Switch is located in trunk under flap of compartment trim.
2. Raise and support vehicle
3. Position a suitable jack and wood block under engine.
4. Remove nut retaining mounts to subframe.
5. Raise engine only sufficiently to allow mount removal.
CAUTION: Do not raise engine excessively or separation of inner CV joints may occur. If necessary, remove driveshafts from transaxle.
6. Remove bolts retaining mount to engine support bracket, then remove mount.
7. Reverse procedures to install.