Continental V8-4.6L DOHC (1995)
Parking Lamp: Initial Inspection and Diagnostic Overview
INSPECTION AND VERIFICATION-PARKING LAMPS
1. Verify the customer's concern by operating the parking lamps to duplicate the condition.
2. Inspect to determine if one of the following mechanical or electrical concerns apply:
3. If inspection reveals an obvious concern that is readily serviced, correct the concern before continuing with Inspection and Verification.
4. If a concern remains after the inspection, use Rotunda New Generation Star (NGS) Tester 007-00500 or equivalent, connected to the data link
connector (DLC) to retrieve continuous diagnostic trouble codes (DTCs) and to execute Self Test Diagnostics for the Lighting Control Module.
5. If self test is passed and no diagnostic trouble codes are retrieved, go to the Symptom Chart to continue diagnostics.
6. If diagnostic trouble codes (DTCs) are retrieved, go to the Lighting Control Module (LCM) Diagnostic Trouble Codes (DTCs) Index to continue
diagnostics.
7. If the lighting control module cannot be accessed by the New Generation Star (NGS) Tester, go to Pinpoint Test EA.
NOTE: Rotunda Service Bay Diagnostic System (SBDS®) 001-00001 or equivalent may be used to diagnose this system. Use Rotunda Digital
Multimeter 105-R0053 or equivalent to perform Pinpoint Tests.