Continental V8-4.6L DOHC (1995)
EGR Electronic Vacuum Regulator Solenoid: Testing and Inspection
EGR Vacuum Regulator Solenoid
REMOVAL
^
Remove the EGR vacuum regulator.
INSPECTION
^
Lightly blow air into the EGR vacuum regulator solenoid and verify that air does not flow.
^
Apply battery voltage and a ground to the EGR vacuum regulator solenoid at the connector.
^
Lightly blow air into the EGR vacuum regulator solenoid and verify that air does flow through the EGR vacuum regulator solenoid.
^
If air does not blow through the EGR vacuum regulator solenoid, replace the EGR vacuum regulator solenoid.
INSTALLATION
^
Install EGR vacuum regulator solenoid in reverse order of removal.
