Continental V8-4.6L DOHC (1995)
Throttle Body: Service and Repair
Removal and Installation
Throttle Body Assembly
REMOVAL
1. Remove air cleaner outlet tube.
2. Remove accelerator cable shield retaining screws and accelerator cable shield.
3. Disconnect throttle position sensor and traction assist assembly (if equipped) at connector and accelerator cable at the throttle lever.
4. Remove crankcase ventilation tube from throttle body vacuum port.
5. Remove four throttle body retaining bolts.
6. Carefully separate throttle body from intake manifold.
7. Remove and discard throttle body gasket between throttle body and intake manifold.
INSTALLATION
1. Clean gasket mating surfaces.
NOTE: If scraping is necessary, do not damage gasket surfaces or allow material to drop into manifold.