Continental V8-4.6L DOHC (1995)
2. Install throttle body, new throttle body gasket and the retaining bolts to the intake manifold. Tighten retaining bolts to 8.0-10 Nm (6-7 lb ft), then
rotate an additional 85-95 degrees.
3. Reinstall crankcase ventilation tube to throttle body vacuum port.
4. Connect throttle position sensor and traction assist assembly (if equipped) at connector and accelerator cable to the throttle lever.
5. Install accelerator cable shield. Tighten retaining screws securely.
6. Install air cleaner outlet tube.
