lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Recall - Lighting Control Module Replacement|Page 246 > < Recall - Lighting Control Module Replacement|Page 244
Page 4
background image

Vehicle Owner Guide: page 107 in 1995; page 82 in 1996
 
To correct this condition, it will be necessary to replace the lighting control module.

Owner Warning Letter
A warning letter was sent on 12/27/95 to owners of affected vehicles requesting them to discontinue use of the Autolamp feature and to operate their
vehicle's exterior lighting manually by using the rotary headlamp switch to turn it on and off. A copy of the December warning letter is included with the
attached Owner Letter which advises owners of parts availability. Owners of vehicles identified in our records as sold as of 12/15/95 were sent the
December warning letter.

Vehicle Delivery Restrictions
Until repairs can be completed, the following delivery restrictions apply:
 
1.

Do not deliver any of the affected vehicles prior to installation of a new lighting control module unless a copy of the December warning letter
(copy attached) is given to the vehicle owner prior to vehicle delivery.

 
2.

Also, before delivering any of the affected vehicles prior to installation of a new lighting control module, disable the Autolamp "ON" setting from
the Memory Profile System (MPS) for both Driver # 1 and Driver # 2 profiles. See the Technical Instructions below and the Continental Memory
Profile System Operator's Guide in the vehicle glove compartment for details.

Other Issues
This repair will also correct two other non-safety related concerns which may also occur on the affected vehicles. These concerns are inadvertent trunk
opening and random horn chirping.

Questions?
Claims Information

- 1-800-423-8851

Other Recall Questions - 1-800-325-5621

Attachments

Attachment I
^

Administrative Information

Attachment II
^

Labor Allowances

^

Parts Ordering Information

Recall - Lighting Control Module Replacement|Page 246 > < Recall - Lighting Control Module Replacement|Page 244