Continental V8-4.6L DOHC (1995)
b.
Check, and adjust if necessary, tire pressure to 207 kPa (30 psi) in the front and 193 kPa (28 psi) in the rear.
c.
Verify the RH parking brake cable is properly retained. It must be secured to the RH forward lower control arm with a tie strap.
d.
Inspect the rear package/module tray to be sure it is properly installed and is not loose.
2.
Obtain the appropriate mass damper for both rear shock absorbers. Each part number contains one (1) damper. Two (2) dampers must be ordered
per vehicle. Refer to the Parts Block for details.
