lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Seals and Gaskets, A/T > < Final Drive Assembly|Page 5689
Page 1
background image

Pressure Regulating Solenoid: Technical Service Bulletins
A/T - AX4N Ticking Noise

Article No.
95-10-6

05/22/95

^

NOISE - "TICKING" - COMING FROM TRANSAXLE AREA - VEHICLES BUILT BEFORE 2/1/95

^

TRANSAXLE - AX4N - "TICKING" NOISE HEARD IN TRANSAXLE AREA - VEHICLES BUILT BEFORE 2/1/95

LINCOLN-MERCURY: 
1995 CONTINENTAL

ISSUE: 
A "ticking" noise may be heard in the transaxle area. This noise may be heard when the transaxle is in "PARK" at normal operating temperature and the
engine is idling. This may be caused by the Electronic Pressure Control (EPC) solenoid calibrated at a low pressure setting.

ACTION: 
Replace the EPC solenoid and main control cover gasket. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

1.

Verify the "ticking" noise is caused by the EPC solenoid by disconnecting the transaxle wire harness connector at the transaxle while the "ticking"
noise is present.

2.

If the noise goes away with the transaxle wire harness connector disconnected, replace the EPC solenoid (F5DZ-7H1 44-A) and the main control
cover gasket (F5DZ-7F396-A). Refer to the Service Manual for removal and installation procedures.

3.

Clear all diagnostic trouble codes that may have been set when disconnecting the transaxle harness connector.

PART NUMBER

PART NAME

F5DZ-7H144-A

Electronic Pressure Control Solenoid

F5DZ-7F396-A

Main Control Cover Gasket

OTHER APPLICABLE ARTICLES: NONE

WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATION

DESCRIPTION

TIME

951OO6A

Replace EPC Solenoid In

2.8 Hrs.

Transaxle And Clear
Diagnostic Trouble Codes

DEALER CODING

CONDITION

BASIC PART NO.

CODE

7H144

56

OASIS CODES: 504000, 597997, 702000, 702100

Seals and Gaskets, A/T > < Final Drive Assembly|Page 5689