Continental V8-4.6L DOHC VIN V (1998)
Multifunction Electronic Control Module: Service and Repair
Driver Seat Module
REMOVAL
1. Disconnect the battery ground cable.
CAUTI0N: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
2. Remove the driver seat.
3. Disconnect the electrical connectors from the Driver Seat Module (DSM).
4. Remove the screws from the module and remove the module.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
