Continental V8-4.6L DOHC VIN V (1998)
BAKE TIME 30 MINUTES AT 60°C (140°F) OR INFRA-RED LIGHT 7-20 MINUTES. AIR DRY 2 HOURS. REMOVE ANY OVERSPRAY
WITHIN 15 MINUTES WITH A DAMP SPONGE (WATER) OR WIPE WITH 352-91 REDUCER. CLEAN SPRAY EQUIPMENT
IMMEDIATELY WITH WATER.
6.
Spray one (1) or two (2) full wet coat(s) of ready-to-spray Anti-chip Stone Abrasion material.
7.
Mix and spray Ford approved basecoat material to hiding. Follow recommended flash time.
8.
Mix and spray two (2) full wet coats of Ford approved clearcoat material. Follow recommended flash time.
Anti-chip Stone Abrasion Materials:
^
Glasurit 1109-1240-6 Stone Chip Protector
^
Gravi-tex
^
Dominion Shure Seal Gravel Gard III
^
Dominion Shure Seal Rocker Gard 8949
^
3M Rocker Schutz
^
3M Rocker Gard II
^
PPG RoadGard DX54
^
Spies Hecker Stone Chip Protector 7100-7104
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 106000
