Continental V8-4.6L DOHC VIN V (1998)
Sunroof / Moonroof Motor: Adjustments
1. Connect the sliding roof panel motor connector to the roof sliding panel wiring connector.
NOTE: The glass panel should be in the CLOSED position prior to synchronizing the sliding roof panel motor.
2. Hold the switch ON until sliding roof panel motor stops.
3. Disconnect the sliding roof panel motor connector from the roof sliding panel wiring connector.
4. Make sure that the lifter arms and guidance ramps are aligned. Connect the sliding roof panel motor and install it to the roof panel.
NOTE: When installing the sliding roof panel motor as an assembly to the sliding roof panel, it may be necessary to turn the sliding roof panel
motor as an assembly slightly to engage the drive splines.
