Continental V8-4.6L DOHC VIN V (1998)
11. Install the RH and the LH timing chain tensioners and tighten the bolts.
NOTE: Make sure that the lock pins are still installed in the timing chain tensioner.
12. Remove the lock pins from the primary timing chain tensioner and make sure all timing marks are aligned.
13. Tighten the bolts.
14. Remove the Camshaft Holding Tool from the camshafts.
15. Install the crankshaft position sensor (CKP) pulse wheel.
16. Install the engine front cover.
17. Start the engine. Check for leaks and proper operation.
