Continental V8-4.6L DOHC VIN V (1998)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Release the drive belt tensioner and remove the drive belt.
3. Disconnect the upper motor mount.
-
Remove the bolt.
-
Position the mount out of the way.
4. Raise the vehicle on a hoist.
5. Remove the RH front wheel and tire assembly.
6. Remove the RH inner fender.
7. Support the engine, transaxle and front sub-frame assembly with a Powertrain Lift and Universal Powertrain Removal Bracket.
