Continental V8-4.6L DOHC VIN V (1998)
1. Clean sealing surfaces of the LH cylinder head and the LH valve cover.
NOTE: Sealing surfaces must be clean and dry before applying sealant.
2. Install the new spark plug bore O-ring seals.
3. Using a suitable sealant, position and glue a new valve cover gasket in the LH valve cover.
4. Apply Silicone Gasket and Sealant F6AZ-19562-A or equivalent meeting Ford specification WSE-M4G323-A6 in two places where the engine
front cover meets the LH cylinder head
NOTE: The bolts and studs must be installed and tightened to specification within four minutes of sealant application.