Continental V8-4.6L DOHC VIN V (1998)
Key Reminder Switch: Service and Repair
REMOVAL
1. Remove the ignition switch lock cylinder
1. Insert the ignition key and turn to the RUN position.
2. Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.
2. Remove the key in ignition warning switch.
1. Pry the clip down.
2. Push the key in ignition warning switch off the rear of the ignition switch lock cylinder.
INSTALLATION
1. To install, reverse the removal procedure.
^
Verify ignition switch lock cylinder operation.