Continental V8-4.6L DOHC VIN V (1998)
Hazard Warning Switch: Description and Operation
The hazard flasher switch (part of the multi-function switch) is located on the top of the steering column forward of the steering wheel.
^
The hazard flasher switch should cycle smoothly from OFF to ON by pressing and releasing the switch top.
^
The switch should produce an audible click when it toggles from one state to another.
^
The switch should extend markedly further above the column when the switch is ON than it does when it is OFF.
When the hazard flasher switch is in the ON position, the four turn signal lamps will flash. Also, the two turn indicators in the VIC will flash
simultaneously.
The steering column switches consist of the:
-
Multi-function.
+
Turn signal.
+
Hazard warning.
+
Windshield wiper/washer.
+
Headlamp dimmer/flash-to-pass.
-
Ignition.
The integrated multi-function switch is mounted to the LH side of the steering column and controls the turn signal, headlamp dimmer/flash-to-pass.
windshield wiper/washer and hazard warning.
The ignition switch is mounted below the steering column and is activated by rotating the ignition switch lock cylinder on the steering column.
