Continental V8-4.6L DOHC VIN V (1998)
equivalent.
5. Position the tire to clear the low tire pressure sensor, mounting strap and counterweight.
INSTALLATION
1. Follow normal tire mounting procedures and the mounting machine manufacturer's instructions.
WARNING: Serious or fatal injury can result from improper mounting, underinflation, overloading or tire damage due to abusive use.
The tire and wheel size must match when mounting the tire on the wheel. Never exceed 278.8 kPa (40 psi).
2. Install the bottom bead.
-
Visually locate the low tire pressure sensor transmitter.
-
Position the bottom bead in drop center between the low tire pressure sensor and bottom flange.
-
Place the tire mounting/dismounting foot in position and start tire bead just before the low tire pressure sensor so that it moves away from the
sensor and the last part of the bead ends at the sensor. Install the bottom bead on the wheel.
3. Install the top bead.
-
Install the top bead on the wheel so the mounting arm moves away from the low tire pressure sensor.
-
Use a tire bar to hold the bead in the drop well of the wheel.
CAUTION: Make sure the last part of the bead to drop onto the wheel is over the low tire pressure sensor.
4. Inflate the tire to specification.
