Continental V8-4.6L DOHC VIN V (1998)
interference.
2. If interference exists, modify the hoist flanges or build up the approach ramps as necessary to provide clearance.
Frame Contact Hoist Lifting Points
WARNING: WHEN HOISTING AT THE LIFT POINTS, ESPECIALLY THE FRONT FRAME LIFT POINTS, BE CAREFUL NOT TO
CONTACT THE BRAKE LINES OR THE FUEL LINES.
CAUTI0N: All four frame contact points must contact the adapters.
1. Position the adapters under the front and rear frame lift points.
NOTE: On frame contact hoists, adapters are necessary to lift the vehicle.
2. Center the adapters on the contact areas.
3. Check for sufficient clearance between the hoist and the exhaust system components.
4. Use the special hoist adapters if recommended by the specific hoist manufacturer.
Twin-Post Hoist Lifting Points
CAUTI0N: Under no circumstances should the vehicle ever be lifted by the front or rear control arms, halfshafts or front wheel Constant Velocity (CV)
joints. Severe damage to the vehicle could result.
1. When lifting the vehicle with a twin-post hoist, wheel adapters must be used under the tires.
Single-Post Hoist Lifting Points
1. Use the hoist adapters at the four contact points.
