Continental V8-4.6L DOHC VIN V (1998)
Fuel Pressure Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
WARNING: DO NOT SMOKE, CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR
NEAR ANY FUEL-RELATED COMPONENT.
HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED, RESULTING IN POSSIBLE PERSONAL
INJURY.
2. Release the fuel pressure.
NOTE: This step is required only if the fuel pressure sensor and the fuel injection supply manifold are installed on the engine.
3. Remove the vacuum line at the fuel pressure sensor.
4. Disconnect the electrical connection at the fuel pressure sensor.
5. Remove the fuel pressure sensor.
-
Remove the screws.
-
Remove the fuel pressure sensor.
