Continental V8-4.6L DOHC VIN V (1998)
5. Install the manual control lever and nut.
1. Install the manual control lever and place it in the overdrive position.
2. Tighten the nut.
6. Install the manual control lever cable.
1. Install the shift actuator cable fitting and the shift cable.
2. Hold the manual control lever in the overdrive position.
3. Tighten the nut.
7. Install the engine air cleaner inlet tube.
1. Install the engine air cleaner inlet tube.
2. Reconnect the intake air temperature sensor.
3. Reconnect the crankcase ventilation tube.
8. Connect the battery ground cable.
9. Check for proper vehicle operation.