Continental V8-4.6L DOHC VIN V (1998)
Fuel Temperature Sensor: Service and Repair
REMOVAL
1. Disconnect the main wiring.
2. Perform the fuel pressure release procedure. See: Fuel Delivery and Air Induction/Fuel Filter/Fuel Pressure Release
3. Disconnect the fuel temperature sensor.
4. Disconnect the spring lock coupling.
-
Remove the fuel temperature sensor.
5. Inspect the O-ring and replace as required.
INSTALLATION
CAUTION: Never use silicone grease, it will clog the fuel temperature sensor. Lubricate the O-rings with clean engine oil meeting Ford specification
WSS-M2C153-G.
1. Follow the removal procedure in reverse order