Continental V8-4.6L DOHC VIN V (1998)
6. NOTE: If the two Torx (R) head retaining bolts on the shoulder safety belt height adjuster are not stripped, install the shoulder safety belt height
adjuster to the body structure as stated in this step. If the front seat shoulder strap adjuster retaining bolts are stripped, replace the shoulder safety
belt height adjuster and install it to the body structure as follows:
Insert the shoulder safety belt height adjuster in the opening of the upper B-pillar structure, making sure the shoulder belt height adjuster knob
on the shoulder safety belt height adjuster is positioned above the D-ring attachment nut. (The tab is located at the top and is to be inserted in
the hole provided in the B-pillar structure.)
7. Hand tighten the bolts until they are snug.
8. Tighten the bolts.
9. Install the B-pillar trim.
10. Operate the front seat shoulder strap adjuster. Make sure it travels from top to bottom and locks properly in each position.