Continental V8-4.6L DOHC VIN V (1998)
7. Remove and discard the stabilizer bar link retaining nut.
CAUTION: Use extreme care not to damage the boot seal. Do not use power tools to tighten the nut, or bearing and seal damage can result.
Install the nut using the hex hold feature to prevent the stud from rotating.
NOTE: Remove the vinyl cover from the upper link stud before removing the stabilizer bar link retaining nut.
8. Disconnect the anti-lock sensor cable and, if equipped, the electronic actuator cable from the front shock absorber bracket.
9. Remove the front fender splash shield.
1
Remove the mounting bolts.
2
Remove the splash shield.
