Continental V8-4.6L DOHC VIN V (1998)
2. Position the wheel hub onto the front wheel knuckle and install the retaining bolts.
CAUTION: Knuckle bore must be clean to allow the wheel hub to be completely seated by hand. Do not press or draw the wheel hub into place.
NOTE: Remove all foreign material from the knuckle bearing bore for correct seating of the new wheel hub.
3. Install the front wheel driveshaft joint into the wheel hub.
4. Install a new front axle wheel hub retainer.
5. Position the lower ball joint into the front suspension lower arm and install a new front suspension lower arm-to-ball joint nut.
6. Install the front disc brake rotor.
7. Install the wheel and tire assembly.
8. Lower the vehicle.
9. Turn the air suspension service switch on.