Continental V8-4.6L DOHC VIN V (1998)
1. Remove the direct one-way clutch assembly.
1. Remove the direct one-way clutch assembly.
2. Remove the direct clutch cylinder thrust washer.
2. Disassemble, clean and inspect the direct one-way clutch, inner and outer races.
3. Assemble the one-way clutch.
CAUTION: The circular depressions on the top of the nylon cage must be visible when installed on the inner race or the transaxle may be
improperly assembled.
NOTE: Outer race must rotate clockwise.
4. Using the O-Ring Tool remove the intermediate and direct clutch hub seal.