Continental V8-4.6L DOHC VIN V (1998)
Fluid - A/T: Service and Repair
Drain and Refill
FLUID DRAIN AND REFILL
1. Place the transaxle range selector lever in the PARK position.
2. Set the parking brake.
3. Start the engine and check the transmission fluid level and condition.
4. Turn the engine off.
5. If equipped, turn the air suspension switch off.
6. Disconnect the battery ground cable.
7. Raise vehicle on a hoist.
8. Remove the lower retaining clip from the lower transaxle cooler line fitting.
9. Depress the tabs on the plastic insert retainer and remove cooler line from fitting.
10. Attach a flexible hose, approximately 0.9 m (3.0 ft.) in length, to the fluid cooler tube with the other end in a suitable, 15-quart container.
