Continental V8-4.6L DOHC VIN V (1998)
Windshield Washer Switch: Service and Repair
MULTI-FUNCTION SWITCH REMOVAL
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
1
Insert the ignition key into the ignition switch lock cylinder and turn to the RUN position.
2
Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.
3. Unscrew the tilt wheel handle and shank and remove.
4. Remove the screws and the LH instrument panel insulator.
