Continental V8-4.6L DOHC VIN V (1998)
Wiper Motor Linkage: Service and Repair
Mounting Arm and Pivot Shaft
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the wiper pivot arm.
1
Remove the nut cap.
2
Remove the nut.
3
Remove the wiper pivot arm.
CAUTION: Do not use clean-up solvents near blades. Do not locate stickers on wiper pattern area of windshield as this will damage blade
elements.
3. Remove cowl top vent panels.
4. Disconnect the wiper motor electrical connector.
