LS V6-3.0L DOHC VIN S (2000)
Windshield Washer Switch: Service and Repair
Multifunction Switch
Removal and Installation
1. Remove the steering wheel.
2. Remove the instrument panel cluster finish panel.
3. Remove the upper and lower steering column shrouds.
1
Remove the screws.
2
Remove the tipper and lower steering column shrouds.
4. CAUTION: Apply two strips of masking tape across the air bag sliding contact to prevent rotation.
Depress the three clips and position the air bag sliding contact aside.
5. Remove the multifunction switch.
1
Disconnect the electrical connector.
2
Remove the multifunction switch.
6. To install, reverse the removal procedure.
