LS V8-3.9L VIN A (2003)
9. Disconnect and remove the driver air bag module.
1
Squeeze the tabs and disconnect the driver air bag module electrical connector.
2
Squeeze the tabs and disconnect the driver air bag module electrical connector.
3
Remove the driver air bag module.
10. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
Vehicles with side air curtains
NOTE: If the headliner has the word "AIRBAG" embossed on it near each B-pillar, the vehicle is equipped with side air curtain modules.
11. Remove the A-pillar trim panel.
12. Disconnect the driver side air curtain module electrical connector.
