LS V8-3.9L VIN A (2003)
3
Route the wire harness and install the pin-type retainers.
4
Install the pressure sensor onto the bracket.
3. Install the climate control component.
1
Position the climate control component into the duct and tie strap it in place.
2
Install the screws.
3
Route the wire harness and install the pin-type retainer to the seat cushion pan.
4. CAUTION: Inspect the occupant classification sensor assembly and seat cushion frame for any foreign objects before installing the
occupant classification sensor assembly to the seat cushion frame. If any foreign objects are found, remove them. Failure to do so may
result in personal injury, in the event of an air bag deployment.
Vehicles having the original occupant classification sensor installed, position the bladder and install the pin-type retainers.
5. CAUTION:
-
Inspect the seat cushion pad and seat cushion trim cover for any foreign objects, before installing the seat trim cover to the seat
cushion pad. If any foreign objects are found, remove them. Failure to do so may result in personal injury, in the event of an air bag
deployment.
-
If replacing only the front passenger seat cushion trim cover, the occupant classification sensor must be rezeroed.
Install the cushion trim cover to the cushion foam pad.
6. CAUTION: Inspect the seat cushion frame and seat cushion pad for any foreign objects before installing the cushion pad and trim cover
assembly to the seat cushion frame. If any foreign objects are found, remove them. Failure to do so may result in personal injury, in the
event of an air bag deployment.
Attach the seat cushion trim cover retainers to the seat cushion frame.
-
Vehicles having a service part occupant classification sensor installed, position the seat cushion trim cover with foam pad and OCS bladder to
the seat cushion frame and attach the trim cover to the frame.
