LS V8-3.9L VIN A (2003)
3. NOTE: Apply clean engine oil to the camshaft journals, the camshaft caps and the camshaft lobes prior to installing the camshafts.
Install the RH camshafts.
Right Side
4. CAUTION: Install the camshaft bearing caps. The camshaft bearing caps are positional and must be installed in their original locations and
orientation or engine damage can occur.
Install the RH camshaft bearing caps.
^
Position the bearing caps.
^
Install the bolts. Tighten the bolts in three stages in the sequence shown.
-
Stage 1: Hand-tighten.
-
Stage 2: Tighten to 6 Nm (53 inch lbs.).
-
Stage 3: Tighten an additional 90 degrees.
