LS V8-3.9L VIN A (2003)
Receiver Dryer: Service and Repair
Receiver Drier Manifold and Tube Assembly
RECEIVER DRIER MANIFOLD AND TUBE ASSEMBLY
NOTE:
-
Installation of a new receiver drier is not required when repairing the air conditioning system except when there is physical evidence of
contamination from a failed A/C compressor or damage the receiver drier.
-
New O-ring seals, lubricated in clean PAG oil, must be installed before reconnecting any A/C fitting that has been disconnected.
REMOVAL
1. Position the vehicle on a hoist with the gear selector in NEUTRAL.
2. Recover the refrigerant.
3. Remove the air cleaner outlet tube.
4. Remove the RH deflector shield.
5. Remove the components in the order indicated in the illustration and table.
INSTALLATION
1. To install, reverse the removal procedure.
2. Lubricate the refrigerant system with the correct amount of clean PAG oil.
3. Evacuate, leak test and charge the refrigerant system.
