LS V8-3.9L VIN A (2003)
13. Attach the restraint system diagnostic tool to the vehicle harness side of the driver side air curtain module electrical connector.
All vehicles
14. Remove the glove compartment.
15. NOTE:
-
The inset view of the illustration is looking up into the instrument panel from underneath.
-
The passenger air bag module electrical connector is located in front of the cross-car beam attached by a pin-type retainer to a bracket on the
back of the passenger air bag module.
Locate the passenger air bag module electrical connector.
16. Disconnect the passenger air bag module.
1
Push the passenger air bag module electrical connector together.
2
Push down, pivoting the electrical connector and release the electrical connector retainer.
3
Pull out, disconnecting the vehicle harness end of the connector from the component end.