LS V8-3.9L VIN A (2003)
6. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS).
7. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure
to remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure
Item 6: Large Electrical Connector Removal Note
1. NOTE: The instrument panel has been removed for clarity.
Disconnect the large restraints control module (RCM) electrical connector.
1
Pinch the thumb tab and pivot the connector position assurance lever all the way back until it stops.
2
Pull out and disconnect the RCM electrical connector.
Item 6: Large Electrical Connector Installation Note
1. Make sure the connector position assurance lever is in the full release position before attempting to connect the connector.
