LS V8-3.9L VIN A (2003)
5. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the steering
wheel removal and installation procedure.
Install the steering wheel. Do not install the driver air bag module at this time.
6. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
7. Connect the battery ground cable.
8. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS). See: Air Bag(s)
Arming and Disarming/Service and Repair/Prove Out Procedure
9. Disconnect the battery ground cable and wait at least one minute.
10. Remove the diagnostic tools from the clockspring electrical connectors at the top of the steering column.
11. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS).
12. Connect the battery ground cable.
13. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from vehicle prior to road use. Failure to
remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure
Item 1: Clockspring Installation Note
