LS V8-3.9L VIN A (2003)
Seat Occupant Sensor: Vehicle Damage Warnings
CAUTION:
-
If installing only the front passenger seat cushion trim cover, the seat occupant classification sensor (OCS) must be rezeroed.
-
The following precautions must be taken before rezeroing of the OCS system.
-
Make sure the OCS system components are connected and no faults are present.
-
Make sure the vehicle has not been exposed to temperatures below 6°C (42°F) or above 36°C (97°F) within four hours prior to the
rezeroing process. If the vehicle has been exposed to temperatures outside the temperature limits (6-36°C), the vehicle must be
exposed to and kept at a temperature within the limits for minimum of four hours.
-
Make sure nothing is present on the passenger seat before rezeroing and nothing is placed on the seat during the rezeroing process.
-
Make sure a minimum five second time period has passed after cycling the ignition switch ON before the rezeroing process.
-
Inspect the occupant classification sensor assembly and seat cushion frame for any foreign objects before installing the occupant
classification sensor assembly to the seat cushion frame. If any foreign objects are found, remove them. Failure to do so may result in
personal injury, in the event of, an air bag deployment.
-
Inspect the seat cushion pad and seat cushion trim cover for any foreign objects, before installing the seat trim cover to the seat cushion
pad. If any foreign objects are found, remove them. Failure to do so may result in personal injury, in the event of an air bag deployment.
-
If replacing only the front passenger seat cushion trim cover, the occupant classification sensor must be rezeroed.
-
Inspect the seat cushion frame and seat cushion pad for any foreign objects before installing the cushion pad and trim cover assembly to
the seat cushion frame. If any foreign objects are found, remove them. Failure to do so may result in personal injury, in the event of an
air bag deployment.
