LS V8-3.9L VIN A (2003)
1. WARNING: The tightening torque of the air bag restraints control module (RCM) retaining bolts is critical for correct system
operation..
NOTE: Make sure the battery negative cable is still disconnected before continuing with the installation portion of this procedure.
To install, reverse the removal procedure.
2. Connect the battery ground cable.
3. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS). See: Air Bag
Systems/Air Bag(s) Arming and Disarming/Service and Repair/Prove Out Procedure
4. Disconnect the battery ground cable and wait at least one minute.
5. Install the floor console.