LS V8-3.9L VIN A (2003)
13. NOTE:
-
The inset view of the illustration is looking up into the instrument panel from underneath.
-
The passenger air bag module electrical connector is located in front of the cross-car beam attached by a pin-type retainer to a bracket on the
back of the passenger air bag module.
Locate the passenger air bag module electrical connector.
14. Connect the passenger air bag module.
15. Install the glove compartment.
Vehicles with side air curtains
NOTE: If the headliner has the word "AIRBAG" embossed on it near each B-pillar, the vehicle is equipped with side air curtain modules.
16. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side air curtain module electrical connector.