LS V8-3.9L VIN A (2003)
3. Remove the climate control components.
1
Remove the screws.
2
Separate the wire harness from the seat cushion pan.
3
Separate the climate control duct and remove the assembly.
4. Remove the OCS.
1
Remove the screws.
2
Separate the pressure sensor.
3
Separate the wire harness from the seat cushion pan.
4
Route the OCS components back through the seat cushion pan and remove the assembly.
5. CAUTION: If installing only a new front passenger seat cushion trim cover, the occupant classification sensor must be rezeroed.
Separate the trim cover from the seat cushion pad.
INSTALLATION
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the removal
procedure.