LS V8-3.9L VIN A (2003)
Tighten the nut.
17. CAUTION: Do not tighten until the weight if the vehicle is resting on the wheel and tire assemblies.
Tighten the nut.
18. Install the splash shield, one pushpin, and two bolts.
19. Check and, if necessary, adjust the front toe.
Toe Adjustment
Front Toe Adjustment
1. Start the engine and center the steering wheel.
2. Turn the engine off and hold the steering wheel in the "straight forward" position using a suitable holding device.
3. Loosen the nuts and remove the clamps.