LS V8-3.9L VIN A (2003)
Stabilizer Bar: Service and Repair
Rear
Stabilizer Bar and Link-Rear
CAUTION: Use the hex holding feature to prevent the ball studs from turning when removing the ball stud nuts.
1. For reference during the installation of the upper arm-to-frame fasteners, measure the distance between the center of the wheel hub and the lip of
the fender with the weight of the vehicle resting on the wheel and tire assemblies.
2. With the vehicle in NEUTRAL, position on a hoist.
3. Remove the components in the order indicated in the following illustration and table.
4. To remove individual components, only carry out the listed steps.
