LS V8-3.9L VIN A (2003)
1. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
NOTE: The manual lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor and tighten the screws in an alternating sequence.
Item 25: Transmission Range Sensor Electrical Connector Installation Note
1. Reconnect the digital TR sensor connector.
2. Slide the boot over the digital TR sensor connector and install a new tie strap.
Item 28: Shift Cable Retainer Installation Note
1. Connect the shift cable to the transmission support.
Item 32: Output Shaft Flange Installation Note