LS V8-3.9L VIN A (2003)
10. CAUTION: The digital TR sensor must fit flush against the case. Tightening one screw before tightening the other may cause the sensor to bind
or become damaged.
Using the special tool, align the digital TR sensor and tighten the screws in an alternating sequence.
11. Install the shift cable to the manual control lever.
12. Raise the transmission up and install the rear transmission mount bolts.
13. Verify that the shift cable is adjusted correctly.
14. Install the driveshaft by aligning the index-marks made during removal for correct driveshaft balance.