LS V8-3.9L VIN A (2003)
4. Illustration 2 of 2. Remove the components in the order indicated in the illustration and table.
5. To install, reverse the removal procedure.
6. Fill the axle with the specified quantity of the specified lubricant.
Item 1: Rear Axle Wheel Hub Retainer Removal Note
1. CAUTION: Do not use a hammer to separate the rear axle halfshaft assembly from the hub. Damage to the threads and internal CV joint
components can result.
Separate the rear axle halfshaft assembly from the hub.
1
Using the special tools, press the outboard CV joint until it is loose in the hub.
2
Remove the special tool.
3
Separate the outboard CV joint from the hub.
Item 7: Rear Halfshaft Assembly Removal Note
