LS V8-3.9L VIN A (2003)
2. CAUTION: After removing the nut, discard it. Always use a new nut for installation.
Use the special tool to hold the rear axle pinion flange while removing the nut.
Item 2: Rear Axle Pinion Flange Removal Note
1. Index-mark the rear axle pinion flange and drive pinion gear to maintain initial balance during installation.
2. Using the special tool, remove the rear axle pinion flange.
Item 3: Rear Pinion Oil Seal Removal Note
1. Use a screwdriver to force up the metal flange of the rear axle drive pinion seal. Install gripping pliers and strike with a hammer to remove the rear
axle drive pinion seal.
Item 3: Rear Pinion Oil Seal Installation Note
1. Lubricate the lips of the new seal with grease.