LS V8-3.9L VIN A (2003)
Front Door Window Regulator: Service and Repair
DOOR WINDOW GLASS - FRONT
REMOVAL
NOTE: The front window motors must be initialized whenever: the motor is removed from the window regulator, a new motor is installed, a new
window regulator is installed, a new window glass is installed, a glass top run removal and installation has been carried out or when carrying out any
operation in which grease or lubricants are applied to the window system. A new front window motor will be in a proportional up/down mode until
initialized. Refer to Door Window Motor Initialization.
1. Remove the front door trim panel.
2. Remove the water shield.
3. To remove individual components, only carry out the steps.